Overview The air filter fan (9025 fan) is located on the upper right side of the cavity and is used to filter harmful gases in the cavity. Product Specification Voltage / Operation Voltage 36 V Operation Current 0.2 A Mat...

Overview The camera is used to determine whether any abnormal problems occur during the printing process and alarm in time. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions...

Overview The control board fan (4010) is located inside the upper case and is used to cool the motherboard and driver board to prevent the board from shutting down due to overheating. Product Specification Voltage / Operati...

Overview The drying box will absorb the humidity in the air to keep the consumables dry, ensuring that the printing effect will not be affected by the status of the consumables.   Product Specification Color Black Package...

Overview The drying box fan is located inside the drying box and is mainly used to circulate the air in the box to ensure uniform distribution of temperature and humidity; increase the flow speed of the air to accelerate the dr...

Overview The drying chamber cable is an 11pin cable used to connect the effector and the motherboard. Product Specification Plug Double-ended 11pin Length 400mm    

Overview The effector fan（2515） is located inside the effector and is used to cool and reduce the temperature of the throat to prevent the consumables from softening or clogging during the melting process of the throat. The fan...

Overview The S1 extruder driver uses the TMC 2160 driver, which is a silent driver. Product Specification Materials PCBA Color Green    

Overview The S1 nozzle uses a 0.4mm bimetallic nozzle made of special material. The upper part of the nozzle is made of brass, which has better thermal conductivity, and the lower part is made of hardened steel, which has stron...

Overview Limit switches are critical components to ensure that the print platform or print head remains in the correct position when homing. Product Specification Materials PCBA Color Green Product Size 30*15*12 mm Produc...

Overview The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...

Overview The driver board of the Flsun S1 motor is located on the side of the motor and is responsible for the operation and micro-step control of the motor. Product Specification Materials PCBA Color Green