Overview The control board fan (4010) is located inside the upper case and is used to cool the motherboard and driver board to prevent the board from shutting down due to overheating. Product Specification Voltage / Operati...

Overview The drying box will absorb the humidity in the air to keep the consumables dry, ensuring that the printing effect will not be affected by the status of the consumables.   Product Specification Color Black Package...

Overview The drying box fan is located inside the drying box and is mainly used to circulate the air in the box to ensure uniform distribution of temperature and humidity; increase the flow speed of the air to accelerate the dr...

Overview The drying chamber cable is an 11pin cable used to connect the effector and the motherboard. Product Specification Plug Double-ended 11pin Length 400mm    

Overview The effector fan（2515） is located inside the effector and is used to cool and reduce the temperature of the throat to prevent the consumables from softening or clogging during the melting process of the throat. The fan...

Overview The hardened steel extruder unit is equipped with double gears made of hardened steel, which provides increased extrusion force, prevents slippage, and enhances abrasion resistance. These gears enable the extruder unit...

Overview The S1 extruder driver uses the TMC 2160 driver, which is a silent driver. Product Specification Materials PCBA Color Green    

Overview Filament Detector is used to detect and prevent blockage and abnormal flow conditions in printing material supply pipes, protect equipment and improve printing success rate. Product Specification Materials Metal、Pl...

Overview The S1 nozzle uses a 0.4mm bimetallic nozzle made of special material. The upper part of the nozzle is made of brass, which has better thermal conductivity, and the lower part is made of hardened steel, which has stron...