Overview The motors are three identical stepper motors installed on the top above the three axes of the printer, used to drive the tool head to move in the XYZ direction. Includes motor , motor cable and synchronized wheel. Pr...

Overview The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...

Overview The PTFE tube connector is a component used to connect PTFE tubes and is installed above the effector module so that consumables can enter the throat correctly. Product Specification Quantity 3 pcs Materials Plasti...

Overview Grease is used to lubricate line gauge, reduce friction, improve printing accuracy, extend the life of parts, etc.   Product Specification P/N 6020A N.W 10g Flash Point 200F/93C Temperature Range -50C to 200C    

Overview The driver board of the Flsun S1 motor is located on the side of the motor and is responsible for the operation and micro-step control of the motor. Product Specification Materials PCBA Color Green  

*Only applicable to the S1 3D printer.

Overview The S1 extruder driver uses the TMC 2160 driver, which is a silent driver. Product Specification Materials PCBA Color Green    

Overview The drying chamber cable is an 11pin cable used to connect the effector and the motherboard. Product Specification Plug Double-ended 11pin Length 400mm    

Overview Limit switches are critical components to ensure that the print platform or print head remains in the correct position when homing. Product Specification Materials PCBA Color Green Product Size 30*15*12 mm Produc...

Overview The driver board of the Flsun S1 motor is located on the side of the motor and is responsible for the operation and micro-step control of the motor. Product Specification Materials PCBA Color Green