Filter
Ausgewählt
meistverkauft
Alphabetisch, A-Z
Alphabetisch, Z-A
Preis, niedrig nach hoch
Preis, hoch nach niedrig
Datum, alt zu neu
Datum, neu zu alt
€15,99
Auf Lager
Overview The belt is a close drive belt, it is installed at the X/Y/Z axies of the FLSUN S1/T1 printer. Its main function is to transmit the motion of the motor to the three axis. Compatibility FLSUN S1 and T1 Printers Insta...
Quick add
Select Compatibility
€8,99
Auf Lager
Overview The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...
Quick add
Select Compatibility
€89,99
Auf Lager
Overview High-pressure cooling fan: Compared to the S1, this high-performance cooling fan provides efficient heat dissipation with lower noise levels. Enjoy a quieter workspace with noise reduced to only 55 dB. Large Diame...
€7,99
Auf Lager
Overview The function of PTFE Tube is to reduce resistance and guide filament. The tube’s inner diameter is 2.7mm, and its outer diameter is 4mm. Please note that the PTFE tubes are consumables and are at risk of wear, as they ...
Quick add
Select Length
€6,99
Auf Lager
Overview Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
€9,99
Auf Lager
Overview The air filter fan (9025 fan) is located on the upper right side of the cavity and is used to filter harmful gases in the cavity. Product Specification Voltage / Operation Voltage 36 V Operation Current 0.2 A Mat...
€34,99
Auf Lager
Overview The camera is used to determine whether any abnormal problems occur during the printing process and alarm in time. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions...
€11,99
Auf Lager
Overview The control board fan (4010) is located inside the upper case and is used to cool the motherboard and driver board to prevent the board from shutting down due to overheating. Product Specification Voltage / Operati...
€69,99
Auf Lager
€6,99
Auf Lager
Overview The drying box will absorb the humidity in the air to keep the consumables dry, ensuring that the printing effect will not be affected by the status of the consumables.   Product Specification Color Black Package...
€26,99
Ausverkauft
Overview The drying box board is the main board of the drying box and is responsible for implementing functions related to the interior of the drying box, including weighing consumables, drying consumables, etc., to ensure the ...
€11,99
Auf Lager
Overview The drying box fan is located inside the drying box and is mainly used to circulate the air in the box to ensure uniform distribution of temperature and humidity; increase the flow speed of the air to accelerate the dr...
Showing 12 of 33 products
Load more items
Tags filtern

RECENTLY VIEWED PRODUCTS