Sortieren
Ausgewählt
meistverkauft
Alphabetisch, A-Z
Alphabetisch, Z-A
Preis, niedrig nach hoch
Preis, hoch nach niedrig
Datum, alt zu neu
Datum, neu zu alt
€15,99
Auf Lager
Overview
The belt is a close drive belt, it is installed at the X/Y/Z axies of the FLSUN S1/T1 printer. Its main function is to transmit the motion of the motor to the three axis.
Compatibility
FLSUN S1 and T1 Printers
Insta...
Quick add
€8,99
Auf Lager
Overview
The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...
Quick add
€43,99
€69,99
Auf Lager
Overview
Top-Tier Cooling Fan: In the case of applying at T1, it will lower the decibel level to 55dB while still meet the cooling need. You can focus on your creations without distraction.
Large Diameter of Air Duct: ...
€7,99
Auf Lager
Overview
The air filter fan (4010 fan) is located in the upper housing and is used to filter harmful gases generated in the cavity.
Product Specification
Voltage / Operation Voltage
24 V
Operation Current
0.1 A?
Materials...
€14,99
Auf Lager
Overview
The belt adjustment kit is used to maintain belt tension, adjust belt position, reduce belt vibration and noise, while reducing manual intervention and improving accuracy.
?
Product Specification
Materials
Metal,...
€5,99
Auf Lager
Overview
The T1 Pro nozzle uses a 0.4mm brass nozzle. Brass has good thermal conductivity, wear resistance and compatibility. And the nozzle is easy to replace.
Installation
Learn more about the replacement of the T1 Pro Nozzl...
€26,99
Ausverkauft
Overview
The camera monitors whether there are any abnormal problems during the printing process. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions.
Remote monitoring: chec...
€5,99
Auf Lager
Overview
Both ends of the camera cable are connected to the camera and the USB adapter board respectively for data transmission.
Product Specification
Materials
Plastic, metal
Color
Black
?
€12,99
Ausverkauft
Overview
The T1 Pro printer use 4 TMC2160 drivers, which is a silent driver.
Product Specification
Materials
PCBA
Color
Green
?
€11,99
Auf Lager
Overview
Both ends of the effector line are connected to the mainboard and the effector respectively, and are used to provide communication and power supply to the effector.
Product Specification
Plug
Double-ended 9pin
Leng...
€8,99
Ausverkauft
Overview
Filament Detector is used to detect and prevent blockage and abnormal flow conditions in printing material supply pipes, protect equipment and improve printing success rate.
Product Specification
Materials
Metal¡¢P...
Showing 12 of 24 products
Load more items
Tags filtern
RECENTLY VIEWED PRODUCTS