Sortieren
Ausgewählt
meistverkauft
Alphabetisch, A-Z
Alphabetisch, Z-A
Preis, niedrig nach hoch
Preis, hoch nach niedrig
Datum, alt zu neu
Datum, neu zu alt
€15,99
Auf Lager
Overview
The belt is a close drive belt, it is installed at the X/Y/Z axies of the FLSUN S1/T1 printer. Its main function is to transmit the motion of the motor to the three axis.
Compatibility
FLSUN S1 and T1 Printers
Insta...
Quick add
€8,99
Auf Lager
Overview
The air duct is used to connect the turbine fan outlet to send air to the effector, dissipate heat to the nozzle and cool filaments. By guiding the cooling air flow and dissipating heat to ensure the colling speed of t...
Quick add
€5,99
Ausverkauft
Overview
The heatbead sensor unit is a piezoelectric ceramic with a bracket installed, and is used to detect the condition of the surface pressure on the heatbed. There are 3 sensors installed on the bottom of the heatbed.
Com...
€3,99
Auf Lager
Overview
Melt extrusion printers will generate VOCs while printing because the heating temperature of ABS, PC, PA and other materials is relatively high, resulting in more VOCs. Materials such as PLA with lower melting points p...
€7,99
Auf Lager
Overview
The air filter fan (4010 fan) is located in the upper housing and is used to filter harmful gases generated in the cavity.
Product Specification
Voltage / Operation Voltage
24 V
Operation Current
0.1 A
Materials...
€14,99
Auf Lager
Overview
The belt adjustment kit is used to maintain belt tension, adjust belt position, reduce belt vibration and noise, while reducing manual intervention and improving accuracy.
Product Specification
Materials
Metal,...
€5,99
Auf Lager
Overview
The T1 nozzle uses a 0.4mm brass nozzle. Brass has good thermal conductivity, wear resistance and compatibility. And the nozzle is easy to replace.
Installation
Learn more about the replacement of the T1 Nozzle on Fls...
€26,99
Ausverkauft
Overview
The camera monitors whether there are any abnormal problems during the printing process. It is installed below the X-axis. The camera has remote monitoring and time-lapse photography functions.
Remote monitoring: chec...
€5,99
Auf Lager
Overview
Both ends of the camera cable are connected to the camera and the USB adapter board respectively for data transmission.
Product Specification
Materials
Plastic, metal
Color
Black
€12,99
Ausverkauft
Overview
The T1 printer use 4 TMC2160 drivers, which is a silent driver.
Product Specification
Materials
PCBA
Color
Green
Showing 12 of 26 products
Load more items
Tags filtern
RECENTLY VIEWED PRODUCTS